Bestway Pool How to Drain

ByMichail

Use your Bestway pool’s built-in Drain Plus valve to start draining-just attach a garden hose, open the internal plug, and turn the knob to begin gravity flow, dropping water to 2–4 inches above the floor. Place the hose outlet below the pool base for steady outflow. Once drained, switch to a 1,000+ GPH submersible pump to remove leftover water efficiently. Wipe the liner with a microfiber cloth, focusing on seams and low spots, then dry completely with a wet-dry vacuum. Lightly dust with talcum powder to prevent sticking during storage. Balance pH between 7.2–7.6, add long-life algaecide, and cover with a weather-resistant winter cover. You’ll find even more tips for keeping your pool in top shape through the off-season.

We are supported by our audience. When you purchase through links on our site, we may earn an affiliate commission, at no extra cost for you. Learn more. Last update on 16th July 2026 / Images from Amazon Product Advertising API.

Notable Insights

  • Use the built-in Drain Plus valve by attaching a hose and opening the plug to start draining.
  • Position the hose outlet below the pool base to ensure proper water flow through gravity.
  • For pools without a valve, use the siphon method by submerging and sealing a hose.
  • Remove remaining 2–4 inches of water with a submersible pump for complete drainage.
  • Clean and dry the liner thoroughly before storage to prevent mold and damage.

Drain Your Bestway Pool Without a Pump

While you might think a pump is essential, draining your Bestway pool without one is totally doable using the built-in Drain Plus valve or a simple siphon method. To drain a Bestway pool efficiently, attach a garden hose to the valve and let gravity do the work-just make sure the outlet end is lower than the pool’s base. If the valve isn’t an option, start a siphon by submerging a hose fully, sealing one end with your thumb, and placing it downhill. Water flows continuously as long as the exit stays below the pool’s water level. Position your pool on a slight incline and keep the hose kink-free for smooth drainage. These methods effectively remove most water, though the last 2–4 inches need manual removal. Using the right setup, you’ll drain a Bestway fast, safely, and without extra gear.

Use the Built-In Drain Valve (And When to Stop)

You’ve got a straightforward way to remove most of the water from your Bestway pool using the built-in Drain Plus valve-no pump needed. Attach a garden hose to the built-in drain valve on the pool wall, open the internal plug, and turn the external knob to start draining. Make sure the pool’s level and stable to avoid stress on the structure. Direct the hose to a safe drainage area well away from the pool’s base. Water will flow steadily until only 2–4 inches remain-this is normal. Stop using the built-in drain valve once flow slows or stops to prevent air from entering and causing leaks. Don’t force it; leftover water needs a submersible pump or wet-dry vacuum. You’ll protect your pool’s integrity and save time on cleanup.

Remove Standing Water From Your Bestway Pool

Since the built-in drain valve on your Bestway pool only removes water down to about 2–4 inches, you’ll need a submersible pump to clear the remaining standing water efficiently. Place the pump in the deepest part of the pool, and it’ll quickly suction out the last few inches. Using a hose to siphon or relying on towels and sponges just takes too long and leaves moisture behind. For best results, position your Bestway pool on a slight incline before draining-this helps gravity move more water toward the drain. Always follow Bestway’s official video guide to guarantee you’re using the right method for your specific model. A submersible pump rated at 1,000+ gallons per hour works well for most Bestway pool sizes. Once the bulk of the water is gone, you’re ready to fully clean and dry the liner without mold or residue risks.

Clean and Dry the Liner Completely

After you’ve drained the bulk of the water using the built-in valve and a submersible pump, it’s time to tackle the remaining moisture head-on-grab a clean microfiber cloth or a sponge and go over every inch of the liner, especially in seams and low spots where water likes to pool. To clean and dry the liner completely, use a dry cloth to wipe down all surfaces, checking for mold, rips, or stains as you go. Pay close attention to folds and creases-they trap moisture and can mildew if not fully dried. A wet-dry vacuum helps pull out hidden water in stubborn areas. Once the surface feels dry to the touch, lightly dust the liner with talcum powder to prevent sticking during storage. Cleaning thoroughly and ensuring no dampness remains keeps your Bestway liner in top shape, avoiding damage and prolonging its life for seasons to come.

Prepare for Storage or Winterization

When getting your Bestway pool ready for storage or winter, start by ensuring the structure stays protected through the off-season. Even after you empty a Bestway pool using the drain valve, you’ll need a submersible pump or wet vacuum to remove leftover water, since the valve doesn’t fully drain it. Before that, balance the water with a pH between 7.2–7.6 and add long-life algaecide to prevent algae growth. Lower the water 4–6 inches below the return jets if leaving the pool up, allowing room for ice expansion. Remove the pump, filter, and accessories, rinse them, then store indoors to avoid freeze damage. Use a winter cover built for harsh weather-it blocks debris, ice, and UV rays, keeping your pool in great shape. This prep protects your investment and makes reopening easier next season.

On a final note

Drain your Bestway pool fully using the built-in valve, stopping when water lowers past the outlet. Remove leftover water with a sponge or wet-dry vac. Clean the liner with mild soap, a soft brush, and rinse thoroughly-avoid harsh chemicals. Let it dry completely, guaranteeing no mold or pests take hold. For long-term storage, keep it in a cool, dry place, folded or rolled. Proper cleanup prevents strain, extends liner life, and guarantees trouble-free setup next season.

Hey there, home‑care enthusiasts! I’m Michail, the curious mind behind CleanGearGuide.com. I’ve spent years tinkering with hardwood floors, tile grout, and laminate surfaces, trying to figure out which finish resists scratches and which sealant keeps a kitchen sparkle‑free. My love for cleaning products and ingredients grew out of a simple experiment: swapping harsh chemicals for vinegar, baking soda, and plant‑based surfactants to see how they really work on everyday messes.
A turning point came when a stubborn wine stain on my favorite couch turned into a mini‑science lesson on stain‑removal chemistry, fabric fibers, and the role of enzymes. That same curiosity sparked a deeper dive into pest and infestation awareness—learning how tiny insects exploit cracks in flooring and how proper sealing can keep them at bay. From there, I started exploring laundry science, home air quality, and even the quirks of outdoor and pool maintenance, like balancing pH and preventing algae growth.
CleanGearGuide.com is my way of sharing those “aha” moments with you. It’s not a textbook; it’s a friendly handbook where I break down complex topics—floor types, cleaning ingredient safety, stain‑removal tactics, pest‑prevention tips, fabric care, indoor air pollutants, and pool upkeep—into clear, actionable advice. I want you to feel confident choosing the right cleaning agents, protecting your surfaces, and maintaining a healthy home environment.
I’m not a certified expert, just a passionate enthusiast who loves getting my hands dirty (or wet, or soapy) and learning from every spill, stain, and scent. If you’re curious about why a certain floor finish shines longer, how a natural ingredient can tackle grease, or what keeps your pool water crystal clear, let’s explore it together—one practical tip at a time.

Similar Posts